17" · 4 bolt patterns
Fits Jeep, Ford, Toyota, Lexus
Air down, grip more. Tires stay put, bead stays where it belongs.
One wheel, two ways to run it. For daily driving, mount the tire on the standard bead seat. For the trail, bolt on the beadlock ring, which clamps the tire bead to the rim for low-pressure off-road driving. RT115BL or RT117BL in 17x9, ET-12 or ET-38, Matte Black or Matte Gunmetal, for Jeep, Ford, Toyota and Lexus. RT104BL covers ATVs in 14 and 15 inch.
Two 17 inch designs for trucks and SUVs, one ATV design, and the rings, hardware and spacers that go with them.
17" · 4 bolt patterns
Fits Jeep, Ford, Toyota, Lexus
17" · 4 bolt patterns
Fits Jeep, Ford, Toyota, Lexus
14" / 15" · 2 bolt patterns
Decorative rings, a 28 piece hardware kit and 3mm spacers are in this collection.
No designs match those filters.
Jeep, Ford Bronco, Ranger and F-150, Toyota and Lexus. Two offsets: 17x9 in ET-12 (4.5" backspacing) or ET-38 (3.5" backspacing). Open the fitment guide to confirm your vehicle.
2 designs fit 5x127 | 71.5.
2 designs fit 6x135 | 87.1.
2 designs fit 6x139.7 | 93.1.
2 designs fit 6x139.7 | 106.1.
For Toyota vehicles, wheels will not fit the OE spare tire carriers.
ET-38 on this pattern is Matte Black only.
4.5" backspacing
3.5" backspacing
The fitment guide shows which offset is listed for your vehicle, with tire sizes.
Find your fitATV: RT104BL in 14x7 and 15x7 ET10, bolt patterns 4x137 | 110 and 4x156 | 131. Popular fitments include Bombardier, Can-Am, and Polaris. See the RT104BL.

Designed for both on-road and off-road driving.
For daily driving, mount tires onto the traditional bead seats.
For off-road driving, secure tires using the beadlock rings.
The short version for mounting a tire with the beadlock ring. Installation must be performed by qualified technicians only, with a torque wrench.
A thick tire bead can keep the ring from sitting flush. A 3mm beadlock spacer may be needed to seat the ring properly.
Remove the beadlock ring and all hardware. Install the valve stems as on a standard wheel, then lay the wheel face-up.
Lube the bottom bead and the barrel, mount the tire, and make sure the outer bead is seated and centered on the top flange.
Line up the holes and hand-thread the bolts from 12 o'clock in a cross star pattern. Torque in passes with a torque wrench, then check the ring sits flat against the wheel.
Inflate until the rear bead pops into place, never above the tire maker's max PSI. Re-torque after the first drive and at least every 250 miles.
Beadlock-secured tires are not DOT approved and are designed for off-road use only. Tires must be mounted on the "standard bead seat" for highways.
Beadlock rings MUST be re-torqued and inspected at least once every 250 miles.
Yes. They are designed for both on-road and off-road driving.
Questions? Contact support.
Jeep, Ford, Toyota and Lexus trucks and SUVs:
For Toyota vehicles, wheels will not fit the OE spare tire carriers. Years and notes are in the fitment guide (same for RT115BL and RT117BL).
Every truck and SUV wheel is 17x9. Match bolt pattern and bore first, then pick an offset:
The fitment guide shows which offset is listed for your vehicle. Not sure? Contact support before you order.
Lug nuts need the right seat and size. Check your year on the lug nut chart.
By a qualified technician, with a torque wrench, and re-checked often.
Full steps and torque numbers: installation guide.
Add-ons for Rocktrix 17" beadlock wheels:
A wheel that mechanically clamps the tire bead to the rim.
Compatible with the majority of OEM TPMS sensors. New TPMS valve stems may be needed.
Questions about your vehicle? Contact support.
Talk to a wheel expert before you order.